博文

Hammer mill daily production steps

Hammer mills will always encounter some unavoidable problems in daily production plants, mainly due to the lack of attention caused by operations. If long-term fixed grinding operations, should be fixed on the cement foundation; if the machine is a mobile business, the unit should be installed in the base made of angle steel to ensure that the power equipment (diesel engine or electric motor) and pulley groove grinding machine rotate in the same plane.
First of all, after the installation of fasteners, the ministry's timber factory inspections tightened. It is appropriate to check the tension of the belt at the same time.
Secondly, turn the rotor by hand before starting the equipment, check the teeth claw hammer, the rotor is flexible, the work is reliable, whether the shell collision phenomenon, whether it is the rotation of the arrow rotor and the same machine, the power direction direction hammer mill, lubrication Good sex.
Again, it should not replace the pulleys, the speed is…

Wood crusher suitable for processing which raw materials

The wood crusher is suitable for crushing the following materials: bamboo flour, fruit husk, Chinese herbal medicine, bark, leaves, wheat bran, konjac, bran, rice hull, corn cob, straw, starch, food, shrimp, fish meal, Shells, seaweed, dehydrated vegetables, hawthorn, ginger, garlic, pumpkin powder, spices, jujube, paper, circuit boards, plastics, chemical raw materials, seawater products, spices, feed, mica, graphite, bentonite, perlite, Distillers grains, furfural, cakes, charcoal, activated charcoal, cellulose, potato residues, tea, hair, soybean meal, cotton, refined cotton, cowhide, sheepskin, plant roots, stems, leaves, flowers, fruits, various edible fungi, etc. This difficult characteristic material processing is an ideal crusher for industries such as chemicals, building materials, medicine, health care, breeding, food, and mosquito coils. (Note that the wood crusher is not suitable for crushing flammable and explosive materials)
In summary, there are three characteristics of…

Biomass production methods and advantages

1. The biomass fuel is of high purity and does not contain other impurities that do not generate heat. Its carbon content is 75-85%, ash 3-6%, and moisture content 1-3%.
2. Biomass fuel does not contain sulfur and phosphorus and will not corrode the boiler. It can prolong the service life of the boiler. It does not contain sulfur and phosphorus. It will not produce sulfur dioxide and phosphorus pentoxide when it is burned. It will not cause acid rain and pollution. The atmosphere does not pollute the environment.
3. Biomass fuel is clean and hygienic, and feeding is also convenient, which reduces the labor intensity of workers, improves the working environment, and saves costs to some extent.
4. Ashes burned from biomass fuels can be recycled as organic fertilizers. Unlike coal, biomass fuels are renewable energy sources.
There are many kinds of raw materials for pressing biomass fuel particles, but special attention needs to be paid to:
1 The moisture content of raw materials should …

Straw pellet machine requirements for raw materials

The requirements for raw materials for straw pellet machines mainly include the following points:
First, the moisture requirement. The stalk pelletizer requires that the moisture content of the raw materials be controlled to be about 15. The too high moisture content will cause the particles to be difficult to form or the yield is low, and the surface of the pellets is not smooth. Generally, the particles enter the granulation chamber and undergo frictional friction between the die and the press roll. Heat generated by the particles will evaporate part of the water, and the water content of the particles is about 8-12. Therefore, if your machine has low output or poor molding, it may be caused by excessive moisture.
Second, size requirements. The size of the raw materials should not be too large. It is generally required that the size of the raw materials entering the granulation chamber is not more than 60% of the diameter of the pellets. If the size of the raw material particles is …

What are the uses of biomass fuel?

图片
Biomass pellets are crushed or crushed rice paddies and rolled into regular solid blocks by special machines! The shape is generally rod-shaped particles or lumpy particles! The pellets can be recycled for use as solid fuels, such as fireplaces, boilers, and power generation furnaces. They belong to the new energy category. Instead of coal, the S (sulfur) and P (phosphorus) contents are minimal when burned.
So is the raw material for biomass energy needed for rice husk biomass pellets a product of today's society? The answer is no, China has a history of 5,000 years. Before 5,000 years ago, our ancestors used sticks to roast fire. Biomass pellets, however, are simply made into granules of natural products such as branches, which are convenient to use and transport. However, its use principle is still used for branches and other environmental protection raw materials.
In China, particle-machined fuel particles are currently developing rapidly in the Yangtze River Delta and Pearl R…

What are the advantages of biomass briquette fuel?

图片
The advantages of biomass fuel produced by biomass pellet machines are summarized as follows:

Clean combustion
(1) Fly ash is rare. Biomass ash* is generally less than 3% (excluding rice husk etc.), which simplifies the dedusting equipment of the combustion device.
(2) The main combustion components of biomass particle fuels are volatile components, and the general content is 70% to 80%. There is very little smoke generation and no black smoke.
(3) Biomass particulate fuels usually do not affect the natural circulation of natural carbon. Even if they are not burned or burned, biomass will release C02 during natural digestion. Therefore, the amount of carbon discharged from biomass will not exceed the amount of carbon absorbed during its growth, thereby realizing zero emissions of C02.
(4) The N content of the biomass itself is much lower than that of coal, which is very advantageous for reducing the generation of NO x.
(5) Less SOx emissions from combustion. The sulfur content of biom…

What are the matters needing attention when using peanut shell machine?

The peanut shell pellet machine production line is mainly used to produce biomass forming fuel "straw pellet coal" from agricultural wastes such as various straws, peanut shells, sawdust, tree branches, and bark. Its working environment is very bad, and therefore its constituent organization needs With certain optimization and enhancement, it is necessary to grasp the knowledge of the use and maintenance of the peanut shell pellet machine in order to increase the stability of the equipment and increase the production efficiency in production. Peanut shell pellet machine at the end of the material suppression, a little wheat flour mixed with edible oil and put it into the machine, press down after 1-2 minutes, so that the mold hole filled with oil, so that the next boot will be able to feed production, both maintenance Mold, and save man-hours. After the peanut shell pellet machine shuts down, loosen the pressure roller adjustment screw and remove the residual material.
We sh…