Four major causes and solutions for premature failure of wood pellet machine bearings
Many customers have prematurely damaged the sawdust machine bearing after purchasing the wood pellet machine. At this time, it is considered that the quality of the bearing produced by the pellet machine manufacturer is not enough, and the indignation is looking for the manufacturer theory. In fact, most people don't know that the general bearing burns out, and many of them are not quality reasons, but the premature damage of the wood chip machine bearing caused by the improper operation of the customer during the operation. The following small series summarizes the following four reasons for your reference. First, improper installation (about 16%) 1. Use brute force during installation. Directly hitting the bearing with a hammer will cause the greatest damage to the bearing; it is the main cause of deformation. 2, the installation is not in place, the installation is biased or not loaded to the bearing position, resulting in too small bearing clearance. The inner and outer rings