Rotexmaster Professional Wood Pellet Machine and Feed Pellet Machine Manufacturer.

"Biomass-forming fuel" is a clean, low-carbon renewable energy source. As a boiler fuel, it has a long burning time. It has a high combustion furnace temperature, is economical, and has no pollution to the environment. It is a substitute for conventional fossil energy. Green fuel. It is based on agricultural and forestry residues as the main raw material, through the process of slicing-pulverization-depurification-fine powder-screening-mixing-softening-tempering-pressing-drying-cooling-quality inspection-packaging, etc. Eco-friendly fuel, high calorific value, full combustion. Biomass molding fuel can be used for high temperature and hot water in the processing of industrial products such as textiles, printing and dyeing, papermaking, food, rubber, plastics, chemicals, and pharmaceuticals. And for enterprises, institutions, hotels, schools, catering, service industries for heating, bathing, air conditioning and domestic use of hot water. Compared with other methods, the ...

In order to ensure the safe and normal operation of the biomass burning machine, it is necessary to perform the following operations: First, operation management: 1, according to the user's raw material consumption law appropriate addition of fuel to ensure the normal operation of equipment; 2, the feeding speed to 3080 as a conventional amount, the fastest does not exceed 100 speed, the slowest can not be less than 20 operation, the air volume configuration for the high-end position; the production line heat transfer system under a good condition of the feed speed can be appropriately accelerated, the air volume can be equipped High-grade, but the exhaust condition of the chimney should be observed at any time, and smoke-free emission is the criterion for determining the feed rate; 3. Observe the change of water temperature from time to time, adjust the displacement, make it safe and save; 4, according to the change of energy consumption of the product, adjust the intermit...

1.Diesel engine: Changchai brand 2.The hydraulic valve has three gears: forward, stop and reverse. The safety of user is secured with a patented feed stopper operated with the control handle. 3.This is the connector for be trailed. Sure, it can be made according to the requirement of customers. 4.It has electric launching system. There are five meters on it: water temperature, machine oil, electric current, fuel oil, oil tank leve l. 5.The oil tank is 55L.It guarantees that you can use it longer than ordinary one. 6.There are two steel dual edge fly wheel blades on the chipper. Sure, if you need four blades on it, we can produce for you. The blade is made by tool steel. 7.There is one bed plate on the inner of the feeding chute. It can guarantee the service life of chipper. 8.The discharge chute gives excellent airflow and easy adjustability. READ MORE: www.rotexmachine.com

In the past few years, the global biomass fuel particle industry has grown significantly. Biomass fuel particles have become the main fuel in many countries. The earliest boom in particle consumption appeared in the European region, which is closely related to their national subsidies and climate. The particle industry around the world has grown tremendously since 2000. According to the data, during the 2015 European Particle Conference, it was announced that about 1.7 million tons of biomass fuel particles were consumed in 2000, and consumed 24.5 million tons in 2013. In 2014, it reached 27 million tons. 28 million tons in 2015. This figure includes 13 million tons of particles for heating and 13 million tons for combustion in power plants. In addition, the most noticeable growth is in the European Union. Recent data show that in 2014 European countries accounted for 50% of global particle production. In other words, 13.5 million tons of 27 million tons of biomass fuel particles ...

Biomass pellet machines use crop straw or wood chips as raw materials and are compressed into pellet fuel by biomass pellet machines. Yuuan Xiaobian introduced all factors that affect the life of the biomass granulator: 1, the material moisture content is too low, the processing product hardness is too strong, the power consumption of the equipment in the processing process is large, the production cost of the enterprise increases, the service life of the biomass particles is prolonged and the machine is reduced. Excessive moisture is not easily crushed, increasing the number of hammer hits. At the same time, heat is generated due to the friction of the material and the impact of the hammer, so that moisture in the processed product evaporates. The evaporated water forms a paste with the crushed fines and plugs the screen. This hole reduces the biomass pelletizer's emissions. In general, the moisture content of the ground material such as cereals, corn stover, etc. is controlle...

Hammer mills will always encounter some unavoidable problems in daily production plants, mainly due to the lack of attention caused by operations. If long-term fixed grinding operations, should be fixed on the cement foundation; if the machine is a mobile business, the unit should be installed in the base made of angle steel to ensure that the power equipment (diesel engine or electric motor) and pulley groove grinding machine rotate in the same plane. First of all, after the installation of fasteners, the ministry's timber factory inspections tightened. It is appropriate to check the tension of the belt at the same time. Secondly, turn the rotor by hand before starting the equipment, check the teeth claw hammer, the rotor is flexible, the work is reliable, whether the shell collision phenomenon, whether it is the rotation of the arrow rotor and the same machine, the power direction direction hammer mill, lubrication Good sex. Again, it should not replace the pulleys, the speed ...

The wood crusher is suitable for crushing the following materials: bamboo flour, fruit husk, Chinese herbal medicine, bark, leaves, wheat bran, konjac, bran, rice hull, corn cob, straw, starch, food, shrimp, fish meal, Shells, seaweed, dehydrated vegetables, hawthorn, ginger, garlic, pumpkin powder, spices, jujube, paper, circuit boards, plastics, chemical raw materials, seawater products, spices, feed, mica, graphite, bentonite, perlite, Distillers grains, furfural, cakes, charcoal, activated charcoal, cellulose, potato residues, tea, hair, soybean meal, cotton, refined cotton, cowhide, sheepskin, plant roots, stems, leaves, flowers, fruits, various edible fungi, etc. This difficult characteristic material processing is an ideal crusher for industries such as chemicals, building materials, medicine, health care, breeding, food, and mosquito coils. (Note that the wood crusher is not suitable for crushing flammable and explosive materials) In summary, there are three characteristics of...

1. The biomass fuel is of high purity and does not contain other impurities that do not generate heat. Its carbon content is 75-85%, ash 3-6%, and moisture content 1-3%. 2. Biomass fuel does not contain sulfur and phosphorus and will not corrode the boiler. It can prolong the service life of the boiler. It does not contain sulfur and phosphorus. It will not produce sulfur dioxide and phosphorus pentoxide when it is burned. It will not cause acid rain and pollution. The atmosphere does not pollute the environment. 3. Biomass fuel is clean and hygienic, and feeding is also convenient, which reduces the labor intensity of workers, improves the working environment, and saves costs to some extent. 4. Ashes burned from biomass fuels can be recycled as organic fertilizers. Unlike coal, biomass fuels are renewable energy sources. There are many kinds of raw materials for pressing biomass fuel particles, but special attention needs to be paid to: 1 The moisture content of raw materials sho...

The requirements for raw materials for straw pellet machines mainly include the following points: First, the moisture requirement. The stalk pelletizer requires that the moisture content of the raw materials be controlled to be about 15. The too high moisture content will cause the particles to be difficult to form or the yield is low, and the surface of the pellets is not smooth. Generally, the particles enter the granulation chamber and undergo frictional friction between the die and the press roll. Heat generated by the particles will evaporate part of the water, and the water content of the particles is about 8-12. Therefore, if your machine has low output or poor molding, it may be caused by excessive moisture. Second, size requirements. The size of the raw materials should not be too large. It is generally required that the size of the raw materials entering the granulation chamber is not more than 60% of the diameter of the pellets. If the size of the raw material particles is...

Biomass pellets are crushed or crushed rice paddies and rolled into regular solid blocks by special machines! The shape is generally rod-shaped particles or lumpy particles! The pellets can be recycled for use as solid fuels, such as fireplaces, boilers, and power generation furnaces. They belong to the new energy category. Instead of coal, the S (sulfur) and P (phosphorus) contents are minimal when burned. So is the raw material for biomass energy needed for rice husk biomass pellets a product of today's society? The answer is no, China has a history of 5,000 years. Before 5,000 years ago, our ancestors used sticks to roast fire. Biomass pellets, however, are simply made into granules of natural products such as branches, which are convenient to use and transport. However, its use principle is still used for branches and other environmental protection raw materials. In China, particle-machined fuel particles are currently developing rapidly in the Yangtze River Delta and Pearl...

The advantages of biomass fuel produced by biomass pellet machines are summarized as follows: Clean combustion (1) Fly ash is rare. Biomass ash* is generally less than 3% (excluding rice husk etc.), which simplifies the dedusting equipment of the combustion device. (2) The main combustion components of biomass particle fuels are volatile components, and the general content is 70% to 80%. There is very little smoke generation and no black smoke. (3) Biomass particulate fuels usually do not affect the natural circulation of natural carbon. Even if they are not burned or burned, biomass will release C02 during natural digestion. Therefore, the amount of carbon discharged from biomass will not exceed the amount of carbon absorbed during its growth, thereby realizing zero emissions of C02. (4) The N content of the biomass itself is much lower than that of coal, which is very advantageous for reducing the generation of NO x. (5) Less SOx emissions from combustion. The sulfur content...

The peanut shell pellet machine production line is mainly used to produce biomass forming fuel "straw pellet coal" from agricultural wastes such as various straws, peanut shells, sawdust, tree branches, and bark. Its working environment is very bad, and therefore its constituent organization needs With certain optimization and enhancement, it is necessary to grasp the knowledge of the use and maintenance of the peanut shell pellet machine in order to increase the stability of the equipment and increase the production efficiency in production. Peanut shell pellet machine at the end of the material suppression, a little wheat flour mixed with edible oil and put it into the machine, press down after 1-2 minutes, so that the mold hole filled with oil, so that the next boot will be able to feed production, both maintenance Mold, and save man-hours. After the peanut shell pellet machine shuts down, loosen the pressure roller adjustment screw and remove the residual material. We sh...

Biomass granules, also known as sawdust granules, are mainly sawdust, wood shavings, bark, sand powder, used wood, and twigs that are produced during wood processing and wood-based panel production; straw produced after crops are harvested; Burned biomass is processed from raw materials for combustion, grilling, and fireplace heating. Its combustion efficiency exceeds over 80% (more than 60% of the efficiency of common coal combustion), combustion efficiency is high, and sulfur dioxide, ammonia nitrogen compounds and dust are produced. less. So, what do you need to pay attention to when selecting wood pellets? Xiaobian arranged six points: The moisture content of raw materials for sawdust pellets is very stringent. No matter which kind of sawdust, the moisture content must be kept within a range (preferably between 14% and 20%). It is too dry to form, and the moisture is large and loose. Material's own adhesion The raw materials themselves must have adhesive strength. If not, th...

Different types of pellet machine have different working principles and there are differences in the processing conditions of materials. Selecting pellet machine suitable for their own industries can improve production efficiency and do more with less. Pellet machines currently have three main series: flat die pellet machines, horizontal ring die pellet machines, and centrifugal high-efficiency vertical ring die pellet machines. These three kinds of pellet machines have their corresponding appropriate choices in the production process and raw materials. Flat die pellet machine: Through the shaft drive, no belts are needed to make pellets, wood pellets can be processed, cat litter can also be processed cattle, sheep and other livestock feed. Easy to operate, easy to maintain, and relatively inexpensive. Compared with other types of pellet machines, the energy consumption is slightly higher, the output is slightly lower, and the maintenance cost is naturally higher. Horizontal ...

Biomass energy refers to the solar energy that is fixed on the earth by the photosynthesis of plants. It is transformed into the form of the earth's biological matter through the biological chain, and is processed to provide energy for raw materials for social life. Biomass pellet fuel is granulated fuel, low temperature compression molding granulated fuel, with professional machinery, special process, no chemical additives, wood pellets, bamboo shavings, branches and other raw materials. Biomass fuels have a high calorific value and are clean and pollution-free. They are high-tech environmental protection products that replace fossil energy. The CO2 released by the combustion of biomass pellet fuel is roughly equivalent to the CO2 absorbed by photosynthesis during its growth, so the greenhouse gas CO2 of biomass pellets is zero emissions. Biomass fuel is a renewable energy source. As long as sunlight is present, the photosynthesis of green plants will not stop, biomass energy ...

Take rice husk as an example to investigate the effect of different rice husk particle size on pyrolysis and incineration characteristics, heat transfer coefficient, and coke incineration. Use TG/DTG6200 thermogravimetric differential thermal analyzer to do heat on rice husk powder of different particle size. After the experiment, different TG, DTG and DTA curves were obtained. The results show that the smaller the grain size of rice husk is, the lower the evapotranspiration point temperature is, and the shorter the time of separation, the greater the heat transfer coefficient and the higher the heating rate, which is favorable for incineration, but the too small particle size increases together. Loss of heat, when the particle size is below the critical standard, easy to show extinguishment. The coke burning process is affected by the size of the particles, the particle size is reduced, the incineration reaction rate is accelerated, and the burning time is shortened, which is favora...

The existence of biomass pellet machines not only reduces the environmental pollution, but also accelerates the rapid economic development. The most important thing is to be able to stimulate the development of the rural economy. What are the advantages of biomass particles compared to coal? 1.Clean and environment-friendly. Biomass pellet fuel is a kind of natural biomass pellet fuel. It can replace city gas, has a low moisture content, is easy to adjust combustion air, and has high combustion thermal efficiency. 2,to save space, due to high-temperature compression of biomass fuel, greatly saving storage space, but also easy to transport. Biomass particles have very good environmental benefits. The use of coal or kerosene not only requires investment in high desulfurization and denitrification equipment, but also requires high-cost desulfurization and denitrification costs for the project operation. Biomass fuel has extremely low sulfur, nitrogen, and ash content, meets the cle...

Now more and more biomass pellet machine manufacturers, customer choice is also more and more difficult. As far as Shandong is concerned, from the first few companies to more than a dozen now, the market is gradually showing fierce competition. With the gradual expansion of the development space of the grain industry, many particle machine manufacturers have spotted this prospect. Have entered the pellet machine industry. Faced with such a dazzling array of particle machine manufacturers, customers are sure to find several companies that they are satisfied with on the Internet when they are planning to purchase equipment. The best quality equipment can be purchased at the lowest price. I believe we all know the truth that "shopping is not fooled". But in the process of comparison, it will be found that the appearance of each manufacturer's equipment is not the same, the model is also different, so that the customer is more confused, do not know which product to choos...

In 2011, the world's largest biomass power plant settled in Zhanjiang, causing many people to surprise themselves. At that time, biomass power generation was still a very unattractive industry, but after nearly six years of development, the power output of the Zhanjiang power plant can now reach 650 million kWh per year. Zhanjiang is the largest eucalyptus production base in China, and 4 million mu of eucalyptus can be cut every year. The eucalyptus has a short growth cycle and can be used to construct furniture, papermaking, etc. However, the remaining bark and branches cannot be used. It was impossible for everyone to avoid it. However, when the biomass power plant was built, these wastes became huge. In the fuel mines, among all the fuel-generating fuel materials, eucalyptus residues can account for 60%-70%, and abundant raw materials ensure adequate fuel supply. In stark contrast to the black dust in the fields of traditional coal-fired power plants is the lush eucalyptus an...

Biomass pellet machines use biomass straw pellets or sawdust as raw materials and are compressed by biomass pellet machines to form pellet fuels. Here we introduce the factors that affect the life of biomass pelletizers: 1. The water content of the material is too low, the hardness of the processed product is too strong, the power consumption of the equipment during processing is large, the production cost of the enterprise is increased, and the service life of the biomass particle machine is reduced. Excessive moisture is not easy to crush, increasing the number of impacts of the hammer. At the same time, heat is generated due to the friction of the material and the blow of the hammer, so that the moisture in the processed product evaporates. The evaporated moisture forms a paste with the crushed fine powder and blocks the screen. The hole reduces the discharge of the biomass pelletizer. Generally, the moisture content of the crushed product of the raw materials such as grain, corn st...

Currently, in order to reduce costs, various alternative raw materials are increasingly available, such as wheat bran, rice bran, DDG, brewers' grains, corn gluten meal, bacterial protein, yeast, rapeseed meal, cottonseed meal, blood meal, meat (bone) powder, silkworm cocoon Powder and so on. Due to the large difference in the quality of these alternative raw materials, the ability of raw materials to absorb steam during the feed pellet press process was reduced, showing loose particles, no surface luster, poor hardness, and high chalking rate. In order to improve the quality of the granules, it is often necessary to add binding ingredients such as wheat, sub-flour or bentonite to the formulation. According to our use situation, adding appropriate amount of wheat or sub-flour is better, mainly because of its rich gluten protein and soluble cellulose, it is easier to absorb steam and mature, thereby improving the particle quality.

Sawdust pellet machine, also called biomass pellet machine , is a complete set of mechanized production equipment that uses solid waste agricultural products and other organic biomass materials as raw materials by pulverizing, pressurizing and densifying and forming plant straw carbon. The pellet machine adopts the extrusion molding method, the interaction principle between the pressing force between the press rolls and the frictional force of the die hole, so that the material is shaped. Material does not need to add any binder or other material during processing. The plant straw granule forming machine uses various crop stalks, tree branches and leaves and other related materials in agricultural production activities, sawdust slags, and waste cultivars grown from fungi as raw materials. The volume of the molded plant straw carbon block is only 1/30 of that of the original plant straw; the specific gravity is 10-15 times that of the same weight of the plant straw; the combustion resis...